Cantilever Beam Impact Testing Machine Mechanical testing machine
manufacturer
Main uses and characteristics:
The Izod impact testing machine fully meets the requirements of
GB/T1843 "Plastic Izod Impact Test Method", ISO180, GB/T2611,
JB/T8761 standards. It is suitable for measuring the impact
toughness of non-metallic materials such as hard plastics,
reinforced nylon, fiberglass, ceramics, cast stones, and electrical
insulation materials. This machine is a testing instrument
featuring a simple structure, beautiful appearance, easy operation,
and accurate data. The display modes include three types: pointer
dial display, digital LCD display, and computer-controlled display.
The computer control mode can print experimental reports. According
to the impact energy, the models are divided into ADN-5.5 type and
ADN-22 type, which can realize the full energy of cantilever beam
impact or any combination of energies.
Working Principle:
A pendulum hammer with known energy strikes the sample supported on
a horizontal beam, destroying the sample with a single impact. The
impact point is centered between the two supports. By calculating
the energy difference of the pendulum before and after the impact,
the energy absorbed by the sample during destruction is determined.
The impact strength is then calculated based on the original
cross-sectional area of the sample.
Instrument characteristics:
The instrument employs high-hardness precision bearings and a
single-axis photoelectric sensor to fundamentally eliminate
friction-induced losses, ensuring frictional energy loss is far
below standard requirements.
It intelligently prompts operational status based on impact
conditions, maintaining real-time interaction with experimenters to
guarantee test success rates.
Meet standards:
International standard ISO180 "Plastics - Determination of Izod
Impact Strength of Hard Materials";
National Standard GB/T1843 Izod Impact Test Method for Hard
Plastics;
JB/T8761 Plastic Izod Impact Testing Machine.
Technical parameter:
| Impact velocity | 3.5m/s |
| Impact energy | 11J, 22J |
| Maximum friction for the loss of energy | <0.5% |
| Preraised Angle | 150±1° |
| Strike center distance | 335mm |
| Pendulum moment | T11=5.89488Nm, T22=11.78976Nm |
| Impact blade to the distance above jaw | 22mm±0.2mm |
| Impact blade round Angle | R(0.8±0.2)mm |
| Measuring Angle Accuracy | 1’ |
| Precision | 0.05% of the indicated value |
| energy unit | J, kgmm, kgcm, kgm, lbft, lbin |
| Temperature | -10℃～40℃ |
| Power | 220VAC, 50Hz |
| Weight | 80KG |
Packing and Shipping:
We use high-quality materials to ensure product safety during
transportation. The machine is first wrapped in bubble wrap, then
placed in a robust cardboard box sealed with heavy-duty tape to
prevent shipping damage.
Package dimensions and weight vary by model, but we optimize for
compactness and lightness to minimize shipping costs. For
international shipments, the machine is secured in a wooden crate
for added protection, with all shipping documents and labels
included.
We partner with reliable carriers for timely, safe delivery.
Customers may request preferred shipping methods, and we will
accommodate accordingly. Upon receipt, inspect the package for
damage and contact our customer service immediately if issues
arise.
FAQ:
Q: What's the model number of this product?
A: The model number is XJD.
Q: What certifications does this product have?
A: It's certified with ISO and CE.
Q: What's the minimum order quantity for this product?
A: The minimum order quantity is 1 set.
